🔥 VALVES FOR LIFE
If you manage to break, snap, bend or crack our valves* then we’ll fix or replace them free of charge!
⚔️ INSERT COMPATIBLE BASE
THE ADDITION OF A UNIQUE FOUR-WAY X-CUT BASE TO ENABLES OUR VALVES TO NOW WORK WITH ALL TYRE INSERTS.
THE CHANNELS CUT INTO THE BASE OF THE VALVE ALLOW AIR AND SEALANT TO PASS THROUGH WHEN INSERTS ARE PUSHED UP AGAINST THEM.
UNLIKE MOST OTHER INSERT-COMPATIBLE VALVES, OUR VALVES HAVE A ‘STRAIGHT-THROUGH’ DESIGN SO THERE’S NO REDUCTION OF SEALANT OR AIR FLOW WHEN TYRE INSERTS ARE NOT USED.
ALL OF THIS WITH NO ADDED WEIGHT!
🔧 Spoke key cap
Our MK2 valves now come with a WORLD-FIRST SPOKE KEY Presta valve CAP!
THE spoke KEY IS SIZED FOR STANDARD 3.4MM SPOKE NIPPLES AND IS THE PERFECT TOOL FOR TIGHTENING LOOSE SPOKES IN TRAILSIDE EMERGENCIES.
To use, simply unscrew the cap, slot your spoke through the gap in the top of the cap and slide down the spoke until the cap fits over your spoke nipple.
Not sure how to true a wheel? Here’s a how-to from Santa Cruz Syndicate Mechanic Jedi Tom Duncan
💨 Valve Core Remover cap
WHETHER YOU’RE IN THE WORKSHOP OR OUT ON THE TRAIL, OUR VALVE CORE REMOVER CAPS HELP TO QUICKLY REMOVE THE VALVE CORE To DEFLATE THE TYRE OR TOP UP WITH SEALANT.
TO de-core the valve, all you need to do is:
- Unscrew the valve cap
- Slot the valve cap over the valve core
- Twist anticlockwise until the core can be pulled out
- Repeat in reverse to refit
📏 What Size?
Our MK2 valves come in 42mm, 60mm and 80mm lengths. This means that whatever the depth of your rim, we have valves to fit your needs.
As a rough guide, We recommend:
- MTB, Urban and XC Rims: 42mm
- Road Rims: 60mm
- Deep Section Road Rims: 80mm
Always Measure your rims before purchasing or contact your Rim manufacturer for further recommendations.
🛠️ FITTING INSTRUCTIONS:
- Remove valve cap, o-ring and lock nut
- Insert valve through valve hole in rim
- Push the o-ring onto valve stem
- Thread the lock nut onto valve stem
- Hand tighten lock nut until firm
- Screw on valve cap