Chrisking Mk2 Tubeless Valve-42mm / Emerald

 3,900.00

???? SPEC CHECK

✅ twelve Chris King colour options

✅ Spoke key cap

✅ valve core remover cap

✅ Made from 7075 aluminium

✅ Valve for life guarantee

✅ Insert Compatible base

✅ Smoked black valve core

✅ 42mm, 60mm OR 80mm length

✅ Replaceable rubber base

✅ Fits all tubeless ready rims

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours – chris king! with our valves for life guarantee and their stunning colourways your bike is in for a real treat for years to come!

???? MK2, WHAT’S NEW?

Still made Made from lightweight anodised 7075 aluminium as standard, our new mk2 tubeless valves are now compatible with all rim inserts and come with a spoke key cap as well as a valve core removal cap.

That’s Right … The best just got even better!

Description

???? VALVES FOR LIFE

If you manage to break, snap, bend or crack our valves* then we’ll fix or replace them free of charge!

⚔️ INSERT COMPATIBLE BASE

THE ADDITION OF A UNIQUE FOUR-WAY X-CUT BASE TO ENABLES OUR VALVES TO NOW WORK WITH ALL TYRE INSERTS.

THE CHANNELS CUT INTO THE BASE OF THE VALVE ALLOW AIR AND SEALANT TO PASS THROUGH WHEN INSERTS ARE PUSHED UP AGAINST THEM.

UNLIKE MOST OTHER INSERT-COMPATIBLE VALVES, OUR VALVES HAVE A ‘STRAIGHT-THROUGH’ DESIGN SO THERE’S NO REDUCTION OF SEALANT OR AIR FLOW WHEN TYRE INSERTS ARE NOT USED.

ALL OF THIS WITH NO ADDED WEIGHT!

???? Spoke key cap

Our MK2 valves now come with a WORLD-FIRST SPOKE KEY Presta valve CAP!

THE spoke KEY IS SIZED FOR STANDARD 3.4MM SPOKE NIPPLES AND IS THE PERFECT TOOL FOR TIGHTENING LOOSE SPOKES IN TRAILSIDE EMERGENCIES.

To use, simply unscrew the cap, slot your spoke through the gap in the top of the cap and slide down the spoke until the cap fits over your spoke nipple.

Not sure how to true a wheel? Here’s a how-to from Santa Cruz Syndicate Mechanic Jedi Tom Duncan

???? Valve Core Remover cap

WHETHER YOU’RE IN THE WORKSHOP OR OUT ON THE TRAIL, OUR VALVE CORE REMOVER CAPS HELP TO QUICKLY REMOVE THE VALVE CORE To DEFLATE THE TYRE OR TOP UP WITH SEALANT.

TO de-core the valve, all you need to do is:

  1. Unscrew the valve cap
  2. Slot the valve cap over the valve core
  3. Twist anticlockwise until the core can be pulled out
  4. Repeat in reverse to refit

    ???? What Size?

    Our MK2 valves come in 42mm, 60mm and 80mm lengths. This means that whatever the depth of your rim, we have valves to fit your needs.

    As a rough guide, We recommend:

    • MTB, Urban and XC Rims: 42mm
    • Road Rims: 60mm
    • Deep Section Road Rims: 80mm

    Always Measure your rims before purchasing or contact your Rim manufacturer for further recommendations.

    ????️ FITTING INSTRUCTIONS:

    1. Remove valve cap, o-ring and lock nut
    2. Insert valve through valve hole in rim
    3. Push the o-ring onto valve stem
    4. Thread the lock nut onto valve stem
    5. Hand tighten lock nut until firm
    6. Screw on valve cap